50
You can record still images and moving pictures using the self-timer recording feature.
You can also use the Remote Commander for this operation.
Recording on the tape
The POWER switch should be set to .
Operate by touching the panel.
(1) During standby, press FN and select PAGE2.
(2) Press SELFTIMER.
The
(self-timer) indicator appears on the screen.
(3) Press EXIT to return to FN.
(4) Press START/STOP.
The self-timer starts counting down from about 10 while beeping. In the last
2 seconds of the countdown, the beep gets faster, then recording starts
automatically.
To stop the countdown for recording on the tape
Press START/STOP. To restart the countdown, press START/STOP again.
Recording still images on the “Memory Stick” during recording
standby (DCR-TRV22/TRV33 only)
The POWER switch should be set to .
Operate by touching the panel.
(1) Follow steps 1 to 3 in “Recording on the tape.”
(2) Press PHOTO deeply.
The self-timer starts counting down from about 10 while beeping. In the last
2 seconds of the countdown, the beep gets faster, then the recording starts
automatically.
Self-timer recording
START/STOP
START/STOP
PHOTO
PHOTO
To Next Page
Loading...
Need help?
General