46
Insert a “Memory Stick” before the following operation.
During tape recording standby
The POWER switch should be set to .
(1) Keep pressing PHOTO lightly until a still image appears. The CAPTURE
indicator appears. Recording does not start yet. To change the still image,
release PHOTO, select a still image again, and then press and hold PHOTO
lightly.
(2) Press PHOTO deeply.
Recording is complete when the bar scroll indicator at the upper right on the
screen disappears.
The image displayed on the screen when you pressed PHOTO deeply will be
recorded on the “Memory Stick.”
During tape recording
The POWER switch should be set to .
Press PHOTO deeply.
The image displayed on the screen when you pressed PHOTO deeply will be recorded
on the “Memory Stick.”
Recording on the “Memory Stick” is complete when the bar scroll indicator disappears.
1
2
FN
FINE
640
50min
FN
12
CAPTURE
FINE
640
50min
101
101
— Advanced Recording Operations —
Recording still images on “Memory Stick” during
tape recording standby or tape recording
(DCR-TRV22/TRV33 only)
To Next Page
Loading...
Need help?
General