62
GB
Symptom
The 1 (on/
standby) switch
cannot be
turned on.
Symptom
The LCD screen
displays no
images.
Troubleshooting
If trouble occurs
If you run into any problems using the printer, use the following guidance to solve the
problem. If the problem persists, consult your Sony dealer.
Power
Displaying images
Cause/Solutions
c When a PictBridge camera or a PC is
connected to the printer and the
printer operates on the PictBridge/PC
mode, no images will be displayed on
the window.
When a memory card or an external
device is connected, the images will be
displayed in the following priority:
“Memory Stick”c“SD Card”c
“External Device”
c Follow the directions of the messages,
if any, and try to solve the problem.
(.page 77)
c Insert a memory card or an external
device properly. (.pages 17 to 19)
c Insert a memory card or an external
device that contains the recorded
images.
Check
• Does the LCD screen of
the printer show “The
printer is being connected
to a PictBridge camera.”
or “The printer is being
connected to a PC.”?
• Are any error messages
displayed (cause/
remedies) on the LCD
screen?
• Is the memory card or an
external device properly
inserted?
• Does the memory card or
an external device contain
images recorded with a
digital camera or other
device?
Cause/Solutions
c Connect the AC power cord to an AC
outlet securely. (.page 16)
Check
• Is the AC power cord
properly connected?
To Next Page
Loading...
Need help?
General
Weight and Dimensions
