86
GB
• Do not use or store the “Memory Stick” under
the following conditions:
– Locations beyond the required operational
conditions including locations such as the
hot interior of a car parked in the sun or/
and in the summer, the outdoors exposed
to direct sunlight, or a place near a heater.
– Humid locations or locations with corrosive
substances present
About the SD card
The SD card slot of the printer allows you
to use an SD memory card
*1
and MMC
standard memory card
*2
.
*1 The printer supports FAT32. The printer has
been demonstrated as operable with an SD
card with a capacity of 2 GB or smaller. To use
a miniSD card, you need an adaptor.
*2 The printer has been demonstrated as
operable with an MMC standard memory
card with a capacity of 128 MB or smaller .
We do not guarantee proper operations for
all types of SD cards/MMC standard
memory cards.
Notes on use
• When using a card, make sure to check correct
insertion direction of the card and correct
insertion slot.
• You cannot read or write the data subject to
the copyright protection. (SD card)
• Do not strike, drop, or bend a card.
• Do not disassemble or modify a card.
• Do not expose a card to water.
• Avoid using a card in areas subject to high
humidity, since it may be easily affected by
the humidity.
• Do not use or store a card in a location subject
to:
– extremely high temperature such as the hot
inside of a car or the outdoors exposed to a
direct sunlight, or a place near a heater.
– direct sunlight
– high humidity or corrosive substances
– static electricity or electrical noises
• When you carry or store a card, put it in the
case supplied with it.
• Do not remove a card or turn off the printer
while the printer is reading or writing data
and the access indicator is flashing.
Otherwise, data may be rendered unreadable
or erased.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
