Maintenance
and
precautions
(Continued)
122
•
How
to
prevent
moisture
condensation
When you bring your camcorder from a
cold place into a warm place, put your
camcorder in a plastic bag and seal it
tightly. Remove the bag when the air
temperature inside the plastic bag has
reached the ambient temperature after about
1 hour.
LCD
screen
• Do not exert excessive pressure on the LCD
screen, as it may cause damage.
•
If
your camcorder is used in a cold place, a
residual image may appear on the LCD screen.
This
is
not a malfunction.
• While using your camcorder, the back
of
the
LCD screen may heat up. This is not a
malfunction.
•
To
clean
the
LCD
screen
If
fingerprints or dust make the LCD screen
dirty, it is recommended you use a soft
cloth to clean it. When you use the LCD
Cleaning Kit (optional), do not apply the
cleaning liquid directly to the LCD screen.
Use cleaning paper moistened with the
liquid.
•
On
adjustment
of
the
touch
panel
(CALIBRATION)
The buttons on the touch panel may not
work correctly.
If
this happens, follow the
procedure below. It
is
recommended that
you connect your camcorder to the wall
outlet (wall socket) using the supplied AC
Adaptor during the operation.
G) Tum
on
your camcorder.
@)
Touch h (HOME) --+
;Ii
(SETTINGS)
--+[GENERALSET]--+
[CALIBRA
nON].
CAUBRATION·
,
1/3
I CANCEL I
@ Touch "x" displayed
on
the screen 3 times
with the comer of a "Memory Stick PRO
Duo" or the like. The position of "x"
changes.
Touch [CANCEL]
to
cancel.
If
you did not press the right spot, try the
calibration again.
" Notes
• Do not use a sharp-pointed object for
calibration. Doing so may damage the LCD
screen.
• You cannot calibrate the LCD screen
if
it is
rotated, or closed with the screen facing out.
On
handling
the
casing
•
If
the casing
is
soiled, clean the camcorder body
with a soft cloth lightly moistened with water,
and then wipe the casing with a dry soft cloth.
• Avoid the following to avoid damage to the
finish:
- Using chemicals such as thinner, benzine,
alcohol, chemical cloths, repellent, insecticide
and sunscreen
- Handling the camcorder with above
substances on your hands
- Leaving the casing in contact with rubber or
vinyl objects for a long period
of
time
To Next Page
Loading...
Need help?
General