Preventing
data
on
the
internal
memory
from
being
recovered
(OCR-OV0810)
E,oouto
'it
EMPTY'?
Data
cannot
be
recovered
II
'
!!
EMPTY'
II
o,oouted.
EST.PROCESS TIME:50
5 Touch [YES]
--+
[YES].
6 When [Completed.] appears,
touch
lOKI.
•
YES
.
4 Press and hold the
~
(BACK
LIGHT) button down (p. 129).
The [(i)EMPTY] screen appears.
[(i)EMPTY] allows you to write
unintelligible data onto the internal
memory. In this way, it may become more
difficult to recover any original data. When
you dispose
of or
give the camcorder
to
somebody, it
is
recommended that you
perform
[(i)EMPTY].
U Notes
o
If
you perform [(i) EMPTY], all the images are
deleted. To avoid the loss
of
important images,
dub
or
copy them on other media (p. 55, 62)
before performing
[(i)EMPTY].
o You cannot perform [Ii) EMPTY] unless you
connect the AC Adaptor to the wall outlet (wall
socket).
o Disconnect all cables except the AC Adaptor.
o While performing [(i)EMPTY], do not apply
any vibrations or shocks to the camcorder.
1 Connect the
AC
Adaptor to the
DC
IN jack on your camcorder,
then connect the power cord
(mains lead) to the wall outlet
(wall socket).
U Notes
o
If
you stop performing [(i) EMPTY] while
[Executing
...
] is displayed, be sure to complete
the operation by performing
[(iJEMPTY]
again before you use the camcorder the next
time.
c:
:::
8:
=
=
3:
CD
Q,
Q)
2 Turn on your camcorder.
3 Touch
~(HOME)--+
~
(MANAGE MEDIA)
--+
[MEDIA
FORMAT]
--+
[INT. MEMORY].
The screen
of
formatting the internal
memory appears.
Format?
Alld."'wlllw
doloted.
EST.PROCESSTIME:51
77
To Next Page
Loading...
Need help?
General