15
Getting Started
When attaching an accessory other than the
handle, attach the accessory shoe plate to
the accessory shoe.
Attaching the accessory shoe plate
Insert the accessory shoe plate in the
direction of the arrow on the plate surface
until the end of the plate engages the end of
the shoe.
Using the accessory shoe
Accessory shoe
Accessory shoe plate
Step 3: Charging the
battery pack
You can charge the “InfoLITHIUM”
battery pack (L series) with the
supplied AC Adaptor/Charger.
b Notes
• You can use a large capacity battery back, NP-
F770 (supplied) or NP-F970 (sold separately),
with your camcorder. You cannot use NP-F570.
1 Set the mode switch to CHARGE.
2 Connect the power cord (mains
lead) to the AC Adaptor/Charger.
3 Connect the power cord (mains
lead) to the wall outlet (wall
socket).
4 Place the battery pack in the slot
of the AC Adaptor/Charger, press
it down, and slide it in the
direction of the arrow as
illustrated.
The charge lamp turns on and charging
starts.
Charge lamp
Continued ,
To Next Page
Loading...
Need help?
General