37
Recording/Playback
3 Select the channel you want to
record.
Using the CH1/CH2 switches, select the
source to be recorded on each channel.
z Tips
• When you use a stereo microphone (2 XLR
plugs), connect the L (left) channel plug to the
INPUT 1 jack, and the R (right) channel plug to
the INPUT 2 jack. Set the CH1 switch to INPUT
1, and the CH2 switch to INPUT 2.
You can adjust the volume of the
microphones connected to the INPUT 1/
INPUT 2 jacks.
1 Set the AUTO/MAN switch (C or
I) of the channel to be adjusted
to MAN.
appears on the screen.
2 Turn the AUDIO LEVEL dial (D or
J) of the channel to be adjusted
during recording or standby.
To restore automatic adjustment
Set the AUTO/MAN witch (G or I) of
the manually adjusted channel to AUTO.
You can select the channel by setting the
switch to CH1 or CH2, to output from the
headphone.
See [HEADPHONE OUT] on the sound at
STEREO MIX (p. 74).
INPUT jack and
recorded channel
Switch position
INPUT 1
CH1
CH2
INPUT 1
INPUT 2
CH1
CH2
INPUT 1
INPUT 2
CH1
CH2
INPUT 2
CH1
CH2
Adjusting the volume
Setting the headphone sound
To Next Page
Loading...
Need help?
General