EasyManuals Logo
Home>ST>Motherboard>STLINK-V3SET

ST STLINK-V3SET User Manual

ST STLINK-V3SET
49 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #45 background imageLoading...
Page #45 background image
UM2448 Rev 6 45/49
UM2448 STLINK-V3SET, B-STLINK-VOLT, and B-STLINK-ISOL information
48
15 STLINK-V3SET, B-STLINK-VOLT, and B-STLINK-ISOL
information
15.1 Product marking
The stickers located on the top or bottom side of the PCB provide product information:
Product order code and product identification for the first sticker
Board reference with revision, and serial number for the second sticker
On the first sticker, the first line provides the product order code, and the second line the
product identification.
On the second sticker, the first line has the following format: “MBxxxx-Variant-yzz”, where
“MBxxxx” is the board reference, “Variant” (optional) identifies the mounting variant when
several exist, "y" is the PCB revision and "zz" is the assembly revision, for example B01.
The second line shows the board serial number used for traceability.
Evaluation tools marked as “ES” or “E” are not yet qualified and therefore not ready to be
used as reference design or in production. Any consequences deriving from such usage will
not be at ST charge. In no event, ST will be liable for any customer usage of these
engineering sample tools as reference designs or in production.
“E” or “ES” marking examples of location:
On the targeted STM32 that is soldered on the board (For an illustration of STM32
marking, refer to the STM32 datasheet “Package information” paragraph at the
www.st.com website).
Next to the evaluation tool ordering part number that is stuck or silk-screen printed on
the board.
15.2 STLINK-V3SET product history
15.2.1 Product identification LKV3SET$AT1
This product identification is based on the MB1441 B-01 main module and MB1440 B-01
adapter board.
Product limitations
No limitation is identified for this product identification.
15.3 B-STLINK-VOLT product history
15.3.1 Product identification BSTLINKVOLT$AZ1
This product identification is based on the MB1598 A-01 voltage adapter board.
Product limitations
No limitation is identified for this product identification.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ST STLINK-V3SET and is the answer not in the manual?

ST STLINK-V3SET Specifications

General IconGeneral
BrandST
ModelSTLINK-V3SET
CategoryMotherboard
LanguageEnglish

Related product manuals