ST STLINK-V3SET User Manual

STLINK-V3SET, B-STLINK-VOLT, and B-STLINK-ISOL information UM2448
46/49 UM2448 Rev 6
15.4 B-STLINK-ISOL product history
15.4.1 Product identification BSTLINKISOL$AZ1
This product identification is based on the MB1599 B-01 voltage adapter and galvanic isolation
board
.
Product limitations
No limitation is identified for this product identification.
15.5 Board revision history
15.5.1 Board MB1441 revision B-01
The revision B-01 is the initial release of the MB1441 main module.
Board limitations
No limitation is identified for this board revision.
15.5.2 Board MB1440 revision B-01
The revision B-01 is the initial release of the MB1440 adapter board.
Board limitations
No limitation is identified for this board revision.
15.5.3 Board MB1598 revision A-01
The revision A-01 is the initial release of the MB1598 voltage adapter board.
Board limitations
The target voltage cannot be provided through bridge connectors CN7 and CN8 while
required for bridge functions. The target voltage must be provided either through CN1 or
through the MB1440 adapter board (refer to
Section 12.5: Target voltage connection).
15.5.4 Board MB1599 revision B-01
The revision B-01 is the initial release of the MB1599 voltage adapter and galvanic isolation
board.
Board limitations
The target voltage cannot be provided through bridge connectors CN7 and CN8 while
required for bridge functions. The target voltage must be provided either through CN1 or
through the MB1440 adapter board. Refer to
Section 13.5: Target voltage connection.

ST STLINK-V3SET Specifications

General

Brand	ST
Model	STLINK-V3SET
Category	Motherboard
Language	English