STEMME S12 User Manual

DOCUMENT NUMBER:
L500-912.820 ISSUE JUL 20, 2016
AMENDMENT: 00
DATE: 
CHAPTERPAGE 612
MAINTENANCE MANUAL STEMME S12
6.5.2 LUBRICATION PLAN
The lubrication points marked in the following gure should be checked and lubricated if required
and during scheduled maintenance or rigging as indicated on the table below. Additional lubri-
cation may be required for additional equipment, observe maintenance instructions in Annex A.
Figure 6.5.2.a
Lubrication Plan
Position. Description Lubricant, Occasion and Remarks
(See also section 6.5.1)
(1) Canopy locks Grease (any scheduled maintenance)
(2) Rear canopy lock (“Roeger Hook”) Oil (any scheduled maintenance)
(3) T-Handles, locking clips (canopy
emerg. handle, prop. brake, prop
positioning)
Grease (any scheduled maintenance)
(4) Center fuselage/wing ttings Grease (any rigging and annually)
(5) Connection bolt for:
Inner/outer wing
outer wing / wing extension
wing extension / winglet
Grease (any rigging and annually)
(6) Shear ttings for:
Inner/outer wing
outer wing / wing extension
wing extension / winglet
Grease (any rigging and annually)

STEMME S12 Specifications

General

Brand	STEMME
Model	S12
Category	Aircrafts
Language	English