STEMME S6 User Manual

FLIGHT MANUAL TSA-M, VARIANT S6
Doc.-No.:P400-006.000 E Page: 4-14 Revision: 6
Date of Issue: 07. October 2008 Agency approved Date of Rev.: 26.09.2011
4.6 Pre-Flight-Inspection ___________________________
4.6.1 Exterior Inspection
The external inspection of the entire A/C should be performed as a walk-around.
Check the following items:
1.
A/C Documents
CHECK
2.
Daily inspection
Completed?
3.
Loading and CG
CHECK and within acceptable limits
4.
Amount of oil
CHECK with oil-dipstick
5. Amount of coolant VISUAL INSPECT trough exhaust
shaft at overflow-bottle in the
engine-compartment
6. Amount of fuel (right/left) Remove filler-caps. VISUAL
INSPECTION. Then, replace filler-
caps
7.
Fuel-flow-gauge (optional)
CHECK for correct setting
8.
Cowlings
CHECK for correct mounting
9. Pitot-tube and static-ports on
pressure-probe
CHECK for correct mounting and for
foreign objects or contamination
10. Dynamic-pressure and vertical-
speed-indicators / variometers
CHECK (carefully blow against tip of
pressure-probe)
11.
Stall-warning
CHECK function
12.
Foreign objects
CHECK, secure loose objects
CHECK flight-controls (an assisting person is needed)
13. Left air-brake CHECK for transmission of force,
maximum deflection and play
14. Left aileron at flap-setting
„NEUTRAL“
CHECK for transmission of force,
maximum deflection and play
15. Left flap CHECK for transmission of force,
deflections from „LDG 2“ to
„CRUISE“ and play
16. Elevator CHECK for transmission of force,
maximum deflection and play
17. Rudder CHECK for transmission of force,
maximum deflection and play
18. Right flap CHECK for transmission of force,
deflections from „LDG 2“ to
„CRUISE“ and play

STEMME S6 Specifications

General

Brand	STEMME
Model	S6
Category	Aircrafts
Language	English