FLIGHT MANUAL TSA-M, VARIANT S6
Doc.-No.:P400-006.000 E Page: 2-18 Revision: ---
Date of Issue: 07. October 2008 Agency approved Date of Rev.: --.--.----
2.16 Lubricant and Coolant ___________________________
2.16.1 Lubricant
To lubricate the engine and the attached gears, use only regular automotive-oils
with additives for gears. Do NOT use alloyed or un-alloyed aircraft-engine oil!
Caution: If AVGAS is used, do NOT use fully synthetic oil!
Note: Only use oils according to the API-specifications. Only oils of
the type „SF“ or „SG“ with gear additives „GL4“ or „GL5“ are
permitted!
Note: Because it is stable in high temperatures and causes little
residue, partially synthetic and fully synthetic oils are
preferred. These should be for 4-stroke high-performance
engines.
Select the viscosity of the lubricating oil with the table presented below. Take
into account the local climatic conditions. The use of multi-grade oils is
recommended because of the lesser influence of temperature.
To Next Page
Loading...
Need help?
General
