北米Model "A2600BE-B" EDITED: 2020/ 10/ 1
switch continuously may cause da-
mage to the moonroof.
NOTE
One-touch operation does not take
place when the moonroof is lowered.
Press the switch continuously to lower
the moonroof.
! Sliding moonroof
s02ak0202
1) Open
2) Close
To open the moonroof:
When the moonroof switch is slid and held
backward, the moonroof will open, then
stop slightly before the fully open position
to reduce wind noise.
Slide the moonroof switch again to fully
open the moonroof.
To close the moonroof:
When the moonroof switch is slid and held
to the close side, the moonroof will fully
close.
To stop the moonroof halfway, slide the
moonroof switch either way.
After washing the vehicle or after it rains,
wipe away water on the roof prior to
opening the moonroof to prevent drops of
water from falling into the passenger
compartment.
NOTE
For the sake of safety, it is recom-
mended that you avoid driving with the
moonroof fully opened.
! Anti-entrapment function
s02ak0203
When the moonroof senses a substantial
enough object trapped between its glass
and the vehicle’s roof during closure, it
automatically moves to the open side and
stop. The anti-entrapment function may
also be activated by a strong shock on the
moonroof even when there is nothing
trapped.
CAUTION
Never attempt to test this function
using fingers, hands or other parts
of your body.
& Sunshade
s02ak05
The sunshade can be slid forward or
backward by hand while the moonroof is
closed.
If the moonroof is opened, the sunshade
also moves back.
Moonroof
162
To Next Page
Loading...
Need help?
General
