北米Model "A2600BE-B" EDITED: 2020/ 10/ 1
1) SRH warning indicator
If SRH is malfunctioning, the SRH warning
indicator on the combination meter display
(color LCD) illuminates and a message
appears on the warning screen when the
ignition switch is in the “ON” position. It
indicates that SRH has been deactivated.
Contact a SUBARU dealer for an inspec-
tion.
NOTE
. The SRH function operative/non-op-
erative status is kept when the engine is
turned off, even if the engine is re-
started.
. When you turn the ignition switch to
the “ON” position, the SRH OFF indi-
cator light will illuminate and turn off
after several seconds.
. SRH only activates when the vehicle
is traveling forward at the speed of
approximately 5 mph (8 km/h) or more.
3-12. Headlight Beam Leveler
s03at
The LED headlights produce more light
than conventional halogen headlights.
When the vehicle is carrying a heavy load
and the headlight beams are angled
upwards, the driver of an oncoming vehicle
may experience glare.
To prevent this, the automatic headlight
beam leveler adjusts the headlights to the
optimum height automatically depending
on the load the vehicle is carrying.
CAUTION
In certain circumstances, the head-
lights may become misaligned, and
the headlight beam leveler will not
reset them to the proper angle. This
may occur after transporting your
vehicle on a flat-bed truck, or if the
vehicle is parked and restarted on
different angles. In such cases, have
the headlight alignment checked by
a SUBARU dealer.
Headlight Beam Leveler
255
3
Instruments and Controls
To Next Page
Loading...
Need help?
General
