4 Unpacking and Storage User Manual
18
4.3 Scope of Delivery
Fig. 4-3 Scope of delivery
Item Name Description
A Inverter ---
B Backplate Used to fix the inverter to the installation site.
C Inverter cap For better weather-proof function of the inverter.
D Documents
Quality certificate, packing list, product test report, CD
and quick user manual
E Fasten set Six units to fasten backplate to metal frame.
F Fix screw
Two M4×16 screws to fix the inverter with the
backplate.
G AC cable gland
When the external diameter of the AC cable you
selected matches it, replace the original AC cable gland
on the bottom of the device before wiring.
4.4 Inverter Storage
Store the inverter properly when the inverter is not to be installed immediately.
Sungrow shall hold no liability for the corrosion of the device or the failure of device
internal components caused by storage of the device not following the
requirements specified in this manual. Inverter must be packed into its original
carton with the desiccant bags inside.
Seal the packing carton with adhesive tape.
Store the inverter in a dry and clean place to protect it against dust and moisture.
Relative temperature: -30℃…70℃; Relative humidity: 0-95%.
If one inverter is stacked on top of the other inverter, the max. stack layer should
be two.
To Next Page
Loading...
Need help?
General
