10 Operation of LCD Display User Manual
70
Press to move the cursor and press to change
value. Press ENTER to confirm setting.
The positive symbol “+” can be changed to the
negative symbol “-”.
The adjustment range is from -9999 to +9999 kWh.
(Energy-adj value)= (Real measured value) - (E-tot
reading value).
10.9.4 Load Default
All history information will be unrecoverable cleared and all parameters will
return to the default value except the protective parameters and time once
the “load default” operation is performed.
Main Screen (Press ENTER)→Menu (Press ×3)→Set-param(Press ENTER)→Enter
password (Press ENTER)→Sys-param(Press ENTER, Press ×3)→Load default (Press
ENTER)
Press ENTER to confirm “load default”.
10.9.5 Checking Firmware Version
Main Screen (Press ENTER)→Menu (Press ×3)→Set-param(Press ENTER)→Enter
password (Press ENTER) → Sys-param(Press ENTER, Press ×4) → Firmware
version(Press ENTER)
Inverter shows detailed firmware information,
including LCD version and DSP version.
The firmware version information is read only.
To Next Page
Loading...
Need help?
General
