23 22 19 182021
You will find the following information and con-
trols in the tuner display:
= button: Change frequency
> button: Open the source menu
? Current memory bank
@ Station information area
A button: Change frequency
B button: Start seek tuning
C button: Start seek tuning
D Tuning scale
E Frequency pointer
F Memory preset buttons
G button: Start scan function
In memory bank FM-AST and AM-AST:
button: Start autostore function)
5.3 Calling up the tuner display
While you are listening to the radio:
f Tap the Listen area in the Home menu.
5.4 Selecting the waveband/mem-
ory bank
While you are listening to the radio:
f Tap > in the tuner display.
Note:
You will also find the button in the
Home menu.
f Tap a memory bank of the desired waveband.
The tuner display for the selected memory bank
is displayed.
5.5 Tuning stations
5.5.1 Tuning stations manually
f Tap = or A once or several times to
adjust the frequency incrementally.
Or:
f Tap any position on the tuning scale D to set
the corresponding frequency.
Or:
f Touch the frequency pointer E and swipe
left or right along the scale to adjust the
frequency continuously.
5.5.2 Starting seek tuning
f Tap B or C to tune to the next or
previous station in the reception area.
Note:
By long-tapping B or C you
adjust the frequency continuously.
After you release the button, the radio
tunes to the next station automatically.
5.5.3 Scanning receivable stations
f Tap G.
The receivable stations are played one after
another for around 10 seconds each.
To continue listening to the station that is cur-
rently being scanned,
f tap G again.
5.6 Storing stations
5.6.1 Storing stations manually
f First select the desired memory bank, if
necessary, and tune to the desired station.
f Long-tap one of the memory preset buttons
F.
The currently tuned station is then stored to the
memory preset button.
FM/AM radio mode
BA_Suzuki_SLN_UG_GEX_IN_en_nonRDS.indd 29 10/5/2016 3:25:12 PM
To Next Page
Loading...
Need help?
General
