6-33 CYLINDER HEAD, CYLINDER AND PISTON
INSTALLATION
Install the cam chain and cam chain tensioner in the reverse
order of removal. Pay attention to the following points:
• Install the cam chain tensioner

1.
$ Cam chain tensioner bolt: 10 N·m (1.0 kgf-m, 7.0 lb-ft)
• Install the cam chain

2 to the crankshaft sprocket
.
• Install the cam chain guide retainer

3.
$ Cam chain guide retainer bolt: 10 N·m (1.0 kgf-m, 7.0 lb-ft)
• Insert the cam chain No.1 guide end

A into the recess

B of
the crankcase securely.
• Fit the projection

C of the cam chain No.1 guide

4 in the
groove

D of the cylinder.
• Install the magneto cover and magneto rotor.
(!15-18 to -19)
• Install the cylinder head and cylinder head cover.
(!6-26 to -31)
CAUTION
Make sure that cam chain engages properly to the
cam chain drive gear.
To Next Page
Loading...
Need help?
General
