PRECAUTIONS FOR
SERVICING
• Replace gaskets, snap rings, circlips, O-rings
and cotter pins with new ones.
• Take care not to expand the end gap larger than
required to slip the circlip over the shaft when
installing a circlip.
• Use special tools where specified.
• Use genuine SUZUKI parts and recommended
oil.
• When two or more persons work together, pay
attention to the safety of each other.
• After reassembly, inspect parts for tightness and
operation.
REPLACEMENT PARTS
Use only genuine SUZUKI replacement parts or
their equivalent. Genuine SUZUKI parts are high
quality parts which are designed and built specially
for SUZUKI motorcycle.
NOTE:
Use of replacement parts which are not equivalent
in quality to genuine SUZUKI parts can lead to per-
formance problems and damage.
! WARNING
Servicing the machine with engine running
can be hazardous. You can be caught in
the moving parts such as the drive chain,
sprockets etc.
Be sure to stop the engine when servicing
the machine.
! WARNING
Servicing the machine without proper
clothes and protective gear can be hazard-
ous. You can be injured if you do not wear
proper clothes and protective gear.
Be sure to wear proper clothes and shoes
for servicing and wear protective glasses,
mask or gloves as necessary.
To Next Page
Loading...
Need help?
General
