Suzuki SMD16 User Manual

13. AIS, DSC MESSAGE
13-7
How to display the detailed information for an AIS target
Tap the AIS target on the AIS list then tap [Detail]. The name of the AIS is shown in
the title bar and navigation data appears in the [TARGET INFO] section.
How to find an AIS target on the plotter display
Tap the AIS target on the AIS list, then tap [Find On Chart]. The plotter display opens
and the selected AIS target is zoomed in.
How to edit an AIS nickname
1. Tap the AIS target to edit its nickname.
2. Tap [Edit Nickname] to display the software keyboard.
3. Enter the nickname. You can use a maximum of 20 alphanumeric characters.
4. Tap [].
5. Tap the close button to finish.
13.11 When an AIS SART is Received...
When an AIS SART is received
(including re-received ones), the
message "AIS SART Alarm" ap-
pears flashing in Status bar. Tap
the Status bar to acknowledge the
message. Then, the AIS SART is
put at the center of the screen and the pop-up shown above appears. To set the AIS
SART as destination, tap [Goto] on the pop-up.
FURUNO
FURUNO
000886617
SUZUKI
SUZUKI
Goto

Suzuki SMD16 Specifications

General

Brand	Suzuki
Model	SMD16
Category	Monitor
Language	English