14. OTHER FUNCTIONS
14-9
BROWSER INSTALLATION section
Others menu items
Menu item Description Option (setting range)
[FAX30 Browser] Show the Facsimile Receiver FURUNO FAX-30 display.
[FA30 Browser] Show the AIS Receiver FURUNO FA-30 display.
[FA50 Browser] Show the AIS Receiver FURUNO FA-50 display.
Menu item Description Option (setting range)
[Chart Master Device] Set to ON to set this equipment as the chart master and share one System
ID and chart unlock code in the network.
Note: If you change the setting for [Master Chart Device] to [OFF], the mes-
sage "Charts have to be unlocked again if you change the Chart Master de-
vice. Are you sure you want to proceed?" appears. Tap [OK] to change the
device, or tap [CANCEL] to cancel.
[System ID] The system ID for this device within the network.
[IP Address] IP address for this unit within the network.
[Quick Self Test] Test the equipment.
[Certification Mark] Show the certification marks this equipment has received.
[ServiceMan] Requires login password. For the service technician only.
[Event Input
Configuration]
These menu items are not used.
[Update Network
Equipments]
Updates all Multi-Function Display in the network. For the service techni-
cian.
[Remote Controller
Configuration]
When there are multiple units in the network, the Remote Controller MCU-
004/MCU-005 can select the display to show on the unit with Remote Con-
troller connection. Further, the cycling order of displays can be set. See
section 1.2.2 (MCU-004) and section 1.2.3 (MCU-005).
[Sirius Radio
Diagnostic]
Check the satellite radio of the FURUNO BBWX3 Sirius/XM Satellite
Weather Receiver for proper operation. See section 12.7.3.
[Sirius Weather
Diagnostic]
Check the weather section of the FURUNO BBWX3 Sirius/XM Satellite
Weather Receiver for proper operation. See section 12.6.
[Reset Default
Settings]
Reset the system to default settings.
To Next Page
Loading...
Need help?
General
