11. BRAKE SYSTEM
11-3
Maintenance Information
Precautions in Operation
Caution
Inhaling brake lining ashes may cause disorders of respiration system, therefore, never use air hose
or dry brush to clean brake parts. Use vacuum cleaner or other authorized tool instead.
y The brake caliper can be removed without removing the hydraulic system.
y After the hydraulic system is removed, or the brake system is felt to be too soft, bleed the hydraulic
system.
y While refilling brake fluid, care should be taken not to let the foreign material entering into the brake
system.
y Do not spill brake fluid on the painted surfaces, plastic or rubber parts to avoid damage.
y Check the operation of the brake system before you go.
Specifications
Item Standard (mm) Limit (mm)
ID of front brake drum 110.0 110.5
ID of rear brake drum 95.0 95.5
Thickness of front brake lining 4.0 2.0
Thickness of rear brake lining 4.0 2.0
Torque values
Nuts for the wheel rim 2.5kgf-m
Nuts for the front wheel 6.0kgf-m
Nuts for the rear wheel 11.0kgf-m
Bolt for rear brake arm 0.55kgf-m
This chapter Contents
To Next Page
Loading...
Need help?
General
