Synesso MVP Technical Manual

10
MVP & MVP Hydra - 2 Piece Side Panels
This side panel is shown with the trim plates removed, to display the way the lower panel interlocks with
the upper panel.
When removing the Lower Side Panel from the espresso machine:
 Loosen the 2 side panel mounng bolts , but do not remove.
 Remove the Thumb Screw from the drain tray
 Push the panel to the back of the machine while liing slightly up
This allows the user easy access to the drain box & allows the technician easy access to all water control
valves on the water inlet (right) side and to the level probes and thermal switches on the le side.
For the technician to access the steam valve, the Upper Panel must be removed.
When removing the Upper Panel from the espresso machine:
 Remove the 2 side panel mounng bolts completely.
 Each bolt is threaded into a plate fastener inside the frame. Be careful not to lose the fasteners.
 The Safari Rack is suspended by, but not threaded onto, short bolts on each side panel. *The Safari
Rack needs to be supported while removing the Upper Panel.

Synesso MVP Specifications

General

Brand	Synesso
Model	MVP
Category	Coffee Maker
Language	English