36
PROGRAMMING
Auto backush can be acvated by pressing the line buon associated with the group you want to ush. Set
the value to “ready”, then place a portalter equipped with a blind basket into the selected brew group. Shi
le on the group head. The selected group will run the brew valve and motor for 10 seconds, followed by 10
seconds o. This will repeat 5 mes. The shot mer will count up to 10 to let you know when it is running.
Upon compleon, the mer will read 10. Remove the portalter and thoroughly clean the diuser screen.
If you have used soap or other cleanser during the backush, run the backush process a second me with
no soap or chemicals to rinse the internal tubing and brew valve. Failure to rinse aer a soap backush can
leave soap residue in the brew valve aecng taste and/or machine behavior.
Any number of brew groups can use the auto backush feature at the same me. The auto backush can be
interrupted mid-cycle by shiing to the le, or right, or by turning the seng on the controller back to “o”.
To cycle back to the temperature overview screen, press the down buon.
Line 1 indicates that you are on the hot water tap control screen.
Line 2 indicates the adjustable amount of me that the hot water tap will run before shung o.
Line 3 gives the opon of seng the hot water me on line 2 by acvang the tap and leng the water ow,
then shung it o. The machine will store the duraon of this pour as the new dispense me.
To cycle to the next display screen, press the down buon.
Menu Level 1: Hot Water Tap
Menu Level 1: Auto Backush
To Next Page
Loading...
Need help?
General
