Takeuchi TB175W User Manual

8
SAFETY
General Precautions
Observe all safety rules
� Operation, inspection and maintenance of
this machine must be performed only by a
trained and qualified person.
�
All rules, regulations, precautions and
safety procedures must be understood
and followed when performing operation,
inspection and maintenance of this
machine.
�
Do not perform any operation, inspection
and maintenance of this machine when
under the adverse influence of alcohol,
drugs, medication, fatigue, or insufficient
sleep.
Wear appropriate clothing and
personal protective equipment
� Do not wear loose clothing or any accessory
that can catch on controls or in moving
parts.
�
Do not wear oily or fuel stained clothing
that can catch fire.
�
Wear a hard hat, safety shoes, safety
glasses, filter mask, heavy gloves, ear
protection and other protective equipment
as required by job conditions. Wear
required appropriate equipment such as
safety glasses and filter mask when using
grinders, hammers or compressed air, as
metal fragments or other objects can fly
and cause serious injury.
� Use hearing protection when operating the
machine. Loud prolonged noise can cause
hearing impairments, even the total loss of
hearing.
Operating temperature range
To maintain the performance of machine and
to prevent it from early wear, observe the
following operating conditions.
�
Do not operate the machine if the ambient
temperature is higher than +45°C (+113°F)
or lower than –15°C (+5°F).
· If operated at an ambient temperature of
higher than +45°C (+113°F), the engine
may overheat and cause the engine oil
to degrade.
When a problem is found on the
machine
If any problem (noise, vibration, smell,
disorder of instrument, smoke, oil leak, wrong
indication of alarm or unusual indication in the
instrument cluster, etc.) is detected during the
operation or inspection and maintenance of
the machine, immediately inform your sales
or service dealer and take proper actions.
Do not operate the machine until the trouble
is cleared.
· If operated at an ambient temperature
of lower than –15°C (+5°F), the parts
made of rubber such as gaskets may
get hardened to cause an early wear or
damage to the machine.
· If the machine is to be used outside the
ambient temperature range described
above, consult your sales or a service
dealer.

Takeuchi TB175W Specifications

General

Brand	Takeuchi
Model	TB175W
Category	Excavators
Language	English