Before Starting Operation
Walk-Around Inspection
Perform the walk-around inspections once a
day before starting the engine the first time
that day.
Perform the inspections as descrAbed under
“Maintenance - Walk-Around Inspection”
(pages 114 and 115).
Daily Inspection
Perform the daily inspections once a day
before starting the engine the first time that
day.
Perform the inspections as described under
“Maintenance - Daily Inspection” (pages
1
16 to 122).
Mounting and Dismounting
WARNING
� Do not jump on or off the machine.
Never attempt to mount or dismount a
moving machine.
�
When mounting and dismounting the
cab, first open the door fully to the
locked position and check that it does
not move.
�
Always face the access system and
maintain a three point contact with
the recommended handrails and steps
while getting on and off the machine.
Keep steps and platform clean.
�
Never use the safety lock lever or
control levers as hand holds.
To Next Page
Loading...
Need help?
General
