Energier Apollo User Manual
7
Energier Apollo is a sine wave inverter which generates a near perfect sinusoidal AC wave power
output that is very similar or even better to what you can get from your utility grid. Pure sine wave
can guarantee the correct function of sensitive equipment (computer, laser printer, TV etc.) or most
demanding inductive load. Also, your home appliances such as fridge, microwave and power tools
will work smoother, cooler and more efficient.
There is a MPPT solar charge controller and an AC charger built in the Energier Apollo, and the
battery can be charged via AC grid and solar photovoltaic (PV) array at the same time.
2.2 Powerful and reliable inverter
2.3 Smart battery charger
High performance pure sine wave
Provided with outstanding surge power capability and low frequency transformer,Energier Apollo
is suitable for heavy inductive load like fridge, coffee maker, microwave, power tools, air conditioner
etc.
High surge power capability
In the event of a grid failure, or shore / generator power being disconnected, the inverter within
Energier Apollo is automatically activated and takes over supply to the connected loads. This
happens so fast (less than 20ms, typical 10ms) that computers and other electronic equipment
will continue to operate without disruption.
Uninterrupted AC power
The power from solar photovoltaic will be the higher priority charging source to the battery first,
when qualified AC input source and solar photovoltaic are presented at the same time.
The total charging current of battery bank will be limited by setting values of the battery capacity
and the max charging rate.
AC charger function can be enabled or disabled by LCD panel or Rapconfig.
Kindly be noticed that once you disabled the AC charger, Energier Apollo will not deliver
the charging function to the battery even though AC grid is available.
To Next Page
Loading...
Need help?
General
