TBB Energier Apollo CH3.0S User Manual

Energier Apollo User Manual
45
24VDC model 48VDC model Estimation DOD
>90%21.0VDC
23.4VDC
46.8VDC About 60%
42.0VDC
Power save function can be enabled or disabled by following setting item. After power save function
has been enabled, user can set power threshold for activated power save function. Threshold range
is from 0.25%-0.5% rated power of Energier Apollo.
The following DOD is ONLY estimation. The exact measure of the battery SOC is almost impossible
with only electrical parameter.
It may vary according to discharge current, battery healthy etc.
Through low voltage setting items, you can configure the premium under voltage alarm and
protection level for your system. Please find the following data.
6.6.2 Battery low voltage setting
6.6.3 How to set power saving function
Under voltage
42V
Under voltage
44V
protection
alarm
Page up
Page down
x 5
Battery type
AGM
General
Advanced
Enter
ESC
Page down
Page up
Power save
20W
Enable
Page up
Page down
x 7
Battery type
AGM
General
Advanced
Enter
ESC

TBB Energier Apollo CH3.0S Specifications

General

Brand	TBB
Model	Energier Apollo CH3.0S
Category	Inverter
Language	English