TBB Energier Apollo CH3.0S User Manual

Energier Apollo User Manual
35
On delivery, Energier Apollo is set to standard factory values. In general, these settings are
suitable for power backup mode. User can use LCD interface or through Rapconfig software to
setup Energier Apollo system configuration. For LCD interface see section 5.4 operation detail
status: LCD indications.
Settings may only be changed by a qualified engineer. Carefully read the
instructions before changes are made.
6. Configuration
After press and hold “ESC” buttons for 1 second, Energier Apollo will return to main menu from any
sub-menu page.
Press “page down” and “page up” button to switch between the items, then press “enter” button.
Note: the password is “1234”
Possibly, the standard battery charging voltage is not suitable for your
batteries! Refer to the manufacturer's documentation, or consult your
battery supplier!
6.1 Buttons function information in setting
Button Description of function
1)Page up; 2)Select setting value or optional
1)Return to previous menu; 2) Cancel current setting
1)Page down; 2)Select setting value or optional
1)Confirm the selected item; 2)Confirm current setting
General
Advanced
Enter
ESC
Password
Status
Information
Alarm
Setting
* * * *
Enter
Enter

TBB Energier Apollo CH3.0S Specifications

General

Brand	TBB
Model	Energier Apollo CH3.0S
Category	Inverter
Language	English