TBB Energier Apollo CH3.0S User Manual

Energier Apollo User Manual
16
4.1.1 Material list
4. Installation
Energier Apollo
User manual
VS - battery voltage sensor
BTS - battery temperature sensor
Kinergy - TBB data logging stick (optional)
4.1 Pre-installation
4.1.2 Location
The unit is packed with following materials. Please confirm the serial number on Energier Apollo is
the same as outer carton.
Please install the equipment in a location of dry, clean, cool with good ventilation, as close as
possible to the battery bank. These should be a clear space of at least 20 cm around the equipment
for cooling.
Working temperature ：-20℃~60℃ ( derating above 25℃)
Storage temperature ：-40℃~85℃
Relative Humidity ：0%~95%, non-condensing
Cooling ： Forced air
This product should be installed by a qualified electrician.
Try and keep the distance between Energier Apollo and the battery to minimum
in order to minimize cable voltage losses.
Excessively high ambient temperature will result in the following:
Reduced service life.
Reduced charging current.
Reduced peak capacity or shutdown of the inverter.
Never mount the appliance directly above the batteries.

TBB Energier Apollo CH3.0S Specifications

General

Brand	TBB
Model	Energier Apollo CH3.0S
Category	Inverter
Language	English