Technicolor TG672 User Manual

65
5 THE TECHNICOLOR GATEWAY WIRELESS ACCESS POINT
E-DOC-CTC-20100728-0008 v2.0
5.3.1 Configuring WPA Encryption
Procedure
Proceed as follows:
1 Open the Technicolor Gateway GUI.
2 Under Office Network, click Wireless.
3 The Wireless Access Point page appears. In the upper-right corner, click Configure.
4 Under Encryption, select Use WPA Encryption.
5 The following RADIUS settings are now available for configuration:
 WPA Radius IP: enter the IP address of your RADIUS server.
 WPA Radius Port: enter the WPA Radius Port.
 WPA Radius Key: enter the WPA Radius Key.
 WPA Version: select the WPA version of your choice. For more information, see “Encryption types” on page 63.
6 Click Apply to immediately apply your changes.
7 Reconnect your wireless client(s) to the Technicolor Gateway using these new security settings.
For more information, see “5.1 Connecting Your Wireless Client via WPS” on page 60 or “5.2 Connecting Your Wireless
Client without WPS” on page 62.

Technicolor TG672 Specifications

General

Brand	Technicolor
Model	TG672
Category	Gateway
Language	English