71
6 TELEPHONY
E-DOC-CTC-20100728-0008 v2.0
6.1.1 Connecting a DECT Phone to Your Technicolor
Gateway
Introduction
The Technicolor Gateway is equipped with a DECT base station allowing you to connect up to five DECT phones.
Before you can start using your DECT phone, you first have to pair it with your Technicolor Gateway.
Procedure
Proceed as follows:
1 P
ut the Technicolor Gateway in pairing mode. You can do either of the following:
Press the DECT button on the Technicolor Gateway until the DECT LED on the front panel starts flashing.
Via the Technicolor Gateway GUI.
1 On
the To o l b o x menu, click Te l e p h o n y.
2 Und
er Pick a task, click DECT pairing.
2 P
ut your DECT phone in pairing mode.
Consult your DECT phone’s user documentation to register your DECT phone.
3 Y
our DECT phone prompts you that If the registration is successful, the message “Registered to base x” appears on the
screen of your Technicolor DECT phone.