TM 11-6625-2735-14-1
TABLE 1-1 (cont)
ELECTRICAL
Characteristics
Performance Requirements Supplemental Information
SIGNAL OUTPUTS
CH 2 VERT SIGNAL OUT One division of deflection gives ap-
proximately 20 mV into 1 M load.
Output Voltage
One division of deflection gives ap-
proximately 10 mV into 50 load.
Output Resistance
Approximately 50
Bandwidth DC to at least 50 MHz into 50
Output DC Level Approximately 0 V.
A and B + GATE Outputs
Output Voltage
Approximately 5 V positive-going.
Output Resistance
Approximately 500
POWER SOURCE
Line Voltage Ranges
(AC, RMS)
115V
Low
99 V to 121 V.
103.5 V to 126.5 V.
108 V to 132 V.
110 V, ±10%.
115 V, ±10%.
120 v, ±10%.
Medium
High
230 V
Low
220 V, ±10%.
230 V, ±10%.
240 V, ±10%.
12 vdc
24 vdc
198 V to 242 V.
207 V to 253 V.
216 V to 264 V.
11.5 vdc to 14 vdc
22 vdc to 28 vdc
Medium
High
Direct Current (option 07)
Line Frequency
48 Hz to 440 Hz.
100 watts at 115 V, 60 Hz.Maximum Power Consumption
Change 1 1-9
To Next Page
Loading...
Need help?
General
