Software features
When you start one of the Clarius
+
applications for the first time, you must agree to the
license agreement before continuing. If you do not respond with "Yes", your system will not
function until you reinstall the software.
You can use the following applications to operate and maintain the 4200A-SCS.
• Clarius: This is the main 4200A-SCS parameter analysis application. You use Clarius to organize
tests into individual projects. You then use Clarius to manage, execute, and review test results
from the projects.
• Keithley Configuration Utility (KCon): KCon allows you to configure external GPIB instruments,
switch matrices, and analytical probers connected to the 4200A-SCS. KCon also provides basic
diagnostic and troubleshooting functions.
• Keithley User Library Tool (KULT): KULT allows you to create algorithms (user modules) in the
C programming language and to integrate these modules into Clarius. The modules can control
internal 4200A-SCS instrumentation and external instrumentation. You also use KULT to create
and manage libraries of user modules.
• Keithley External Control Interface (KXCI): KXCI allows you to use an external computer to
remotely control 4200A-SCS SMUs over the GPIB bus or ethernet.
• Keithley Pulse Application (KPulse): A nonprogramming alternative to configure and control
installed 4225-PMU or 4220-PGU pulse units. You can use it for quick tests that require minimal
interaction with other 4200A-SCS test resources.
To Next Page
Loading...
Need help?
General
