Tektronix Keithley 4200A-SCS Setup And Maintenance

Model 4200A-SCS Setup and Maintenance User's Manual Section 3: Keithley Configuration Utility (KCon)
4200A-908-01 Rev. A December 2020 3-21
To set up 4145B emulation:
1. Open KCon.
2. Select KXCI Settings. The KXCI Settings dialog box is displayed, as shown in the following
figure.
3. In the Function column, select the 4145 function that the SMU will emulate.
4. In the Number column, select the number that is used for the device in your 4145B program.
Figure 24: KXCI Settings for 4145B emulation
Command Set
The Command Set option chooses the control mode through which KXCI runs the 4200A-SCS:
4200A (Normal) or 4145 Emulation.
4200A (Normal) selects the 4200A command set. This command set includes all the 4145 Emulation
commands plus an additional 4200A-only command.
In 4145 Emulation mode, the KXCI GPIB command set, status model, and output data are similar in
function and format to those supported by the Keysight 4145B Semiconductor Parameter Analyzer,
with substantially expanded performance.
The following table summarizes some differences and similarities between the two modes.

Tektronix Keithley 4200A-SCS Specifications

General

Brand	Tektronix
Model	Keithley 4200A-SCS
Category	Measuring Instruments
Language	English