Tektronix MDO32 User Manual

Field or control Description
Format Lists the available formats to which you can save files. The available save formats are set by the type
of file being saved.
T
ap the field and select the graphic save format.
Ink Saver Toggles Ink Saver mode on and off.
OK, Save Screen Capture Saves the file to the specified location, closes the Save As configuration menu, and displays a
confirmation message.
Waveform tab fields and controls
The following settings are specific for saving a waveform.
Field or control Description
File save type Use the W
aveform tab to save waveform(s) to a file. Selecting Waveform sets the file extensions in
the Save As Type field to available waveform file formats.
Save As Type Lists the available formats to which you can save files. The available save formats are set by the type
of file being saved.
Tap the field and select the graphic save format.
Format Select the waveform save format.
Source Sets the waveform source to save. You can save a single waveform, or save all active (displayed)
waveforms.
Gating Sets the method to save a specified part of the waveform data.
None saves the full waveform data (default).
Cursors saves the waveform data located between the vertical cursors. If cursors aren't on when
selecting cursor gating, the cursors are activated.
Screen saves the waveform data that is on the screen.
Gating notes:
• Default Setup restores Gated Save to its default setting (None).
• The state of Gated Save gets saved in Setup and Session files.
• Gated saves do not work on plot waveform data.
• Gating cannot be used to save waveform data while in FastFrame mode.
OK, Save Waveform Saves the file to the specified location, closes the Save As configuration menu, and displays a
confirmation message. The active (displayed) waveforms are saved.
Setup tab fields and controls
The following settings are specific for saving an instrument setup.
Field or control Description
File save type Use the Setup tab to save the instrument setup and measurement settings to a file. Selecting Setup
sets the file extension in the Save As T
ype field to .set.
OK, Save Setup Saves the file to the specified location, closes the Save As configuration menu, and displays a
confirmation message.
Menus and dialog boxes
3 Series Mixed Domain Oscilloscope Printable Help 179

Tektronix MDO32 Specifications

General

Brand	Tektronix
Model	MDO32
Category	Test Equipment
Language	English