Tektronix MDO32 User Manual

Operating requirements
Use the oscilloscope within the required operating temperature, power
, altitude, and signal input voltage ranges to provide the most
accurate measurements and safe instrument operation.
Environment requirements
Characteristic Description
Operating temperature -10 °C to +55 °C (+14 °F to +131 °F)
For proper cooling, keep the sides and rear of the instrument clear of obstructions for
2 inches (51 mm).
Operating humidity 5% to 90% relative humidity (% RH) up to +40 °C (+104 °F), Noncondensing.
5% to 60% RH above +40 °C up to +55 °C (+104 °F to +131 °F), Noncondensing.
Operating altitude Up to 3000 meters (9842 feet)
Power requirements
Characteristic Description
Power source voltage 100 V - 240 V
AC RMS
, ±10%, single phase
Power source frequency 50/60 Hz, 100-240 V
400 Hz ±10% at 100 to 132 V
Power consumption 130 W maximum
Input signal requirements
Keep the input signals within allowed limits to ensure the most accurate measurements and prevent damage to the analog and digital
probes or instrument.
Make sure that input signals are within the following requirements.
Table 12: Maximum analog input
Input Description
Analog input channels, 1 M Ω setting, maximum input
voltage at BNC
300 V
RMS
Measurement Category II
De-rate at 20 dB/decade between 4.5 MHz and 45 MHz, De-rate 14 db between
45 MHz and 450 MHz. Above 450 MHz, 5 V
RMS
.
Analog input channels, 50 Ω setting, maximum input
voltage at BNC
5 V
RMS
with a peak at ±20 V
. (DF ≤ 6.25%).
Table continued…
Install your instrument
3 Series Mixed Domain Oscilloscope Printable Help 33

Tektronix MDO32 Specifications

General

Brand	Tektronix
Model	MDO32
Category	Test Equipment
Language	English