Tektronix MDO32 User Manual

Function Setting
DHCP Enabled
BOOTP Enabled
mDNS & DNS-SD Enabled
e* Scope Password Protection Disabled
LXI Password Protection Disabled
e* Scope and LXI Password Empty string (default)
See also
I/O (Utility menu) on page
184
Self Test configuration menu (Utility menu)
Use this menu to view power-on diagnostic results, run extended self tests, and verify the 250 kΩ termination control works on input
channels.
To open the Self Test configuration menu:
1. Tap Utility in the Menu bar.
2. Tap Self Test....
Tap anywhere outside of the menu to close the menu.
Note: Remove all input signals before running the extended self tests.
Self Test configuration menu fields and controls
Field or control Description
250 kΩ Verification
Opens a menu to verify that 250 kΩ termination can be enabled or disabled for each channel. Closing
the menu restores the normal termination setting.
Error Log
Opens a menu that lets you view the instrument log file. The log file is a valuable information resource
when working with T
ektronix Customer Support to troubleshoot a problem or report an issue.
Power-on Self test Results
Displays the power-on self test status (Passed or Failed).
Extended Self Test Results
Lists the status of each Extended self tests (Passed or Failed).
If one or more tests fail at power-on, tap on Run Self Test and see if the test or tests continue to fail. If
tests continue to fail, contact your nearest Tektronix Service Center for help with resolving the problem.
Run N Times
Double tap to open the Run N Times menu and set the number of times to run the extended self tests.
Table continued…
Menus and dialog boxes
3 Series Mixed Domain Oscilloscope Printable Help 187

Tektronix MDO32 Specifications

General

Brand	Tektronix
Model	MDO32
Category	Test Equipment
Language	English