Getting Started
1-10 SPG600 & SPG300 Sync Pulse Generators User Manual
Analog Audio Outputs.
101.Press the left (
W) or right (X) arrow button to select Analog Audio.
102.Press the ENTER button.
103.Connect the 1+2/RIGHT XLR connector to the audio analyzer input using the
XLR cable.
104.Check that the audio signal output from the connector is correct.
105.Move the XLR cable from the 1+2/RIGHT XLR connector to the 3+4/LEFT
XLR connector.
106.Check that the audio signal output from the connector is correct.
Standard Accessories
The following accessories are shipped with the sync pulse generator:
Documents and CD-ROM
The following documents and CD-ROM are standard accessories:
SPG 600 & SPG300 Sync Pulse Generators Quick Reference Manual,
Tektronix part number 071-1341-XX.
SPG600 & SPG300 Sync Pulse Generators Application Software CD-ROM,
Tektronix part number 063-3685-XX. This CD-ROM contains signal files, the
Logo Generator application software, and the PDF version of the SPG600 &
SPG300 User Manual.
For detailed information about Logo Generator and how to use it, refer to
Appendix C: Using Logo Generator.
To Next Page
Loading...
Need help?
General
