To Next Page

To Previous Page

Data Input/Output

3- 260

CSA7000 Series, TDS7000 Series, & TDS6000 S eries Instruments User Manual

You can clear individual references of data or delete waveform files. If you are

sure you do not want the data a reference waveform contains, use the procedures

that follow to clear it. To clear all references and setups, use Tek Secure.

Overview To clear references Control elements and resources

Prerequisites 1. The instrument must be powered up. You must have

access to a waveform saved by the instrument.

H See Powering On the Instrument on page 1--9.

Display the

reference

control window

2. From the toolbar, touch Refs, and select the tab (Ref 1

to Ref 4) of the reference that you want to delete.

Delete the

reference

3. Touch Delete to delete the reference waveform.

Delete a

reference

waveform file

4. To display the Delete Reference Waveform window,

from the Delete Wfm File window, touch Delete. (See

right.)

The Delete Reference Waveform window allows

navigation to directories, lists waveform files in the

directory, and provides for selection of a waveform file.

To Clear References

Tektronix TDS6000 Series User Manual

Other manuals for Tektronix TDS6000 Series