Tektronix TDS6000 Series User Manual

Appendix C: Menu Bar Commands
CSA7000 Series, TDS7000 Series, & TDS6000 S eries Instruments User Manual
C-13
Table C- 8: Measure menu commands (Cont.)
Menu FunctionSubmenu
Histogram Measure-
ments
Waveform Count, Hits in
Box, Peak Hits, Median,
Maximum, Minimum,
Peak to Peak, Mean,
Standard Deviation,
Mean 1StdDev,
Mean 2StdDev,
Mean 3 StdDev
Displays the selected measurement of the histogram
Annotation Standard, Detailed, Off,
Meas1, Meas 2, Meas 3,
Meas 4, Meas 5,
Meas 6, Meas 7, Meas 8
Allows you to select the type of measurement annotations, turn measurement
annotations off, or to select the measurement that you want to annotate.
Masks Commands
Table C--9 lists the commands available from the Masks menu (optional on
TDS7000 Series & TDS6000 Series) on the menu bar.
Table C- 9: Masks menu commands
Menu Submenu Function
Mask Setup Displays the Mask Setup window that you use to create mask waveforms
Mask Type Displays the Type tab of the Mask Setup window that you use to select the type
of mask
Source Displays the Source tab of the Mask Setup window that you use to select the
source of mask
Tolerance Setup Displays the Tolerance Setup tab of the Mask Setup window that you use to set
up the mask margin tolerance
Pass/Fail Setup Displays the Pass/Fail Setup tab of the Mask Setup window that you use to set
up pass/fail testing
Pass/Fail Results Displays the Pass/Fail Results tab of the Mask Setup window that you use to
view test results

Tektronix TDS6000 Series Specifications

General

Brand	Tektronix
Model	TDS6000 Series
Category	Test Equipment
Language	English