Tektronix TDS6000 Series User Manual

Installation
CSA7000 Series, TDS7000 Series, & TDS6000 S eries Instruments User Manual
1-15
Enabling Your LAN and Connecting to a Network
You can connect the instrument to a network to enable printing, file sharing,
internet access, and other communications functions. Before you make the
connection, do the following steps to enable network access to the instrument:
Power
down
1
Power
on
Rear panelFront panel
2
Connect a keyboard
and mouse
3
Figure 1- 3: Enabling your LAN and connecting to a network
4. As the instrument begins to boot, press the F2 key on the keyboard
repeatedly until the message “Entering SETUP” (“Loading SETUP” on
some instruments) appears.

Tektronix TDS6000 Series Specifications

General

Brand	Tektronix
Model	TDS6000 Series
Category	Test Equipment
Language	English