Tektronix TDS6000 Series User Manual

Appendix B: Automatic Measurements Supported
CSA7000 Series, TDS7000 Series, & TDS6000 S eries Instruments User Manual
B-13
Table B- 2: Supported measurements and their definition (Cont.)
Measurements Annotation descri ptions
Comm
measurement
annotations
Noise P-P 1 box indicating the histogram boundaries.
In detailed mode, 4 hori zontal arrows and 2 horizontal bars indicating the eye window left,
right, top, and base.
Noise RMS 1 box indicat ing the histogram boundaries.
In detailed mode, 4 hori zontal arrows and 2 horizontal bars indicating the eye window left,
right, top, and base.
S/N Ratio 1 box indicating the histogram boundaries.
In detailed mode, 4 hori zontal arrows and 2 horizontal bars indicating the eye window left,
right, top, and base.
Cyc Distortion 2 horizontal arrows indicati ng the time of the rise, time of the fall, and the reference level.
In detailed mode, 4 hori zontal arrows and 2 horizontal bars indicating the eye window left,
right, top, and base. In detailed mode, 2 horizontal arrows indicating the position of
the crossings.
Q-Factor 4 horizontal arrows and 2 horizontal bars indicating the eye window left,
right, top, and base. In detailed mode, 2 horizontal bars indicating the eye top and base.

Tektronix TDS6000 Series Specifications

General

Brand	Tektronix
Model	TDS6000 Series
Category	Test Equipment
Language	English