HDLG7 HD Dual Link Video Generator module remote commands
HDLG7 HD Dual L
ink Video Generator module remote
commands
This section describes the remote commands used to control the HDLG7 HD
Dual Link Video Generator module remotely. The commands to the module are
divided int
o the following two groups:
OUTPUT commands
SENSE commands
OUTPUT co
mmands
Use these commands control the output parameters of the module.
Command tree
:OUTPut1
:ALPHa
COPY_YG|FF_OP|FF_10P |FF_20P|FF_ 30P|
FF_40P|FF_50P|FF_60P |FF_70P|FF_ 80P|
FF_90P
|FF_100P
:CONVert
:BLACkwhite ON|OFF
:LINK
:AUDio 0|1|2
:STATe?
:MO
Ve
:HORizontal <numeric_value>
:VERTical <numeric_value>
:PERiod <numeric_value>
:RANDom[:STATe] ON|OFF
:SAMPling
Draft
126 TG8000 Multiformat Test Signal Generator Programmer Manual