Tektronix TG8000 Programmer's Manual

HDLG7 HD Dual Link Video Generator module remote commands
FF_100P
100% Flat Field
LIN_5STEP 5 Step Staircase
LIN_RAMP Ramp
LIN_VRAMP Valid Ramp
MON_RED 100% Red Field
MON_75RED 75% Red Field
MON_GREEN 100% Green Field
MON_75GREEN 75% Green Field
MON_BLUE 100% Blue Field
MON_75BLUE 75% Blue Field
MON_CONV Convergence
PULSE_2T30
2T30 Pulse and Bar
SDI_EQU
Equalizer Test
SDI_PLL
PLL Test
SDI_MTX SDI Matrix
:OUTPut1:SYNThesize:SIGNa l
Returns the current HD test signal.
SE
NSE commands
Use these commands to set the timing offset of the LINK B outputs relative to the
LINK A outputs.
Refer to Operating Basics in the TG8000 User Manual for detailed information
about the setting range.
Command tree
:SENSe1
:CORRection
:MDELay
:HORizontal <numeric_value>
Command d escription
:SENSe1:CORRection:MDELay :HORizontal <numeric_value>
Sets the horizontal timing o ffset of the LINK B outputs. The timing resolution
is clock-cycles. The units are microseconds.
:SENSe1:CORRection:MDELay :HORizontal?
Returns the current horizontal timing offset of the LINK B outputs.
Draft
132 TG8000 Multiformat Test Signal Generator Programmer Manual

Tektronix TG8000 Specifications

General

Brand	Tektronix
Model	TG8000
Category	Portable Generator
Language	English