Tektronix TG8000 Programmer's Manual

Error messages and codes
Error codes with a negative value are SCPI standard error codes; errors with a
positive value are unique to the TG8000.
Command errors
Command errors are returned w hen there is a s yntax error in the command.
Table 9: Command errors
Error code Error message
-100 command error
-10
1
inv
alid character
-102
syn
tax error
-103 invalid separator
-1
04
da
ta type error
-105
GE
T not allowed
-108 parameter not allowed
-109 missing parameter
-
110
c
ommand header error
-111 header separator error
-112 program mnemonic too long
-113
undefined header
-114
header suffix out of range
-120 numeric data error
-121 character
-123 exponent too large
-124 too m any digits
-128 numeric data not allowed
-130
suffixerror
-131
invalid suffix
-134
suffix too long
-138
suffix not allowed
-140 character data error
-141 invalid character data
-144 character data too long
-148 character data not allowed
-150 string data error
-151 invalid string data
-158 string data not allowed
Draft
TG8000 Multiformat Test Signal Generator Programmer Manual 173

Tektronix TG8000 Specifications

General

Brand	Tektronix
Model	TG8000
Category	Portable Generator
Language	English