Tektronix TG8000 Programmer's Manual

ATG7 Analog Test Generator m odule remote commands
Returns the ste
p increment used by the UP or DOWN commands. The <n>
in the command represents the output connector and you can specify from 1
through 4. "1" represents the BLACK 1 connector, "2" represents the BLACK
2 connector, "3" represents the SIGNAL connector, a nd "4" represents the
BARS connector.
Draft
44 TG8000 Multiformat Test Signal Generator Programmer Manual

Tektronix TG8000 Specifications

General

Brand	Tektronix
Model	TG8000
Category	Portable Generator
Language	English