Tektronix WVR6020 User Manual

Specifications
Table 17: Ground closure remote / LTC time code input characteristics (cont.)
Characteristic Performance requirement Reference information
Ground Closure Input
signaling
TTL thresholds, 5 V max
input, –0.5 V min input. P ull
low to assert.
Has internal 10 kΩ pull-up to 5 V on each input. D irect or
encoded inputs m ust be asserted and stable for at least 150 ms
to be recognized reliably. Inputs that are stable for 75 ms or less
will never be recognized.
Hex Binary Pins
15, 14, 13, 5
Direct mode
selection
Encoded
mode
selection
F1111
none
No action
E1110Preset1
CPS B
D 1101 Preset 2
CPS A
C
1100
SDI B
B 1011 Preset 3
SDI A
A 1010
Channel B
9 1001
Channel A
8 1000
7
0111 Preset 4
60110 Factory
Preset
5
0101 Preset 5
4 0100 Preset 4
3 0011 Preset 3
2 0010 Preset 2
1 0001 Preset 1
0 0000 unused
Ground Closure Output
characteristics
Open collector output,
30 V maximum, 100 mA
maximum, 300 mW
maximum.
Table 18: Power supply characteristics
Characteristic Performance requirement Reference information
Electrical Rating, typical
100-240 VAC ±10%, 50/60 Hz, 100 watts
maximum.
Continuous range from 90 to 264 VAC.
Supply Type Single phase
Supply Connection, typical
Detachable cord set with lock.
Power Consumption, typical < 90 VA (50 watts).
Fuse
Primary fuse value 3.15 A H (20 mm x
5 mm).
Not operator replaceable. Please refer to
qualified personnel.
10 Waveform Rasterizers Specifications and Performance Verification

Tektronix WVR6020 Specifications

General

Brand	Tektronix
Model	WVR6020
Category	Measuring Instruments
Language	English