Depending on the respective interface, a queue is created automatically for each class, but
only for data traffic classified as outgoing and for data traffic classified in both directions. A
priority is assigned to these automatic queues. The value of the priority is equal to the
value of the class ID. You can change the default priority of a queue. If you add new
queues, you can also use classes in other class plans via the class ID.
14.4.3.1 New
Choose the New button to create additional prioritisations.
Fig. 88: Networking->QoS->QoS Interfaces/Policies->New
The Networking->QoS->QoS Interfaces/Policies->New menu consists of the following
fields:
Fields in the Basic Parameters menu.
Field Description
Interface Select the interface for which QoS is to be configured.
Prioritisation Al-
gorithm
Select the algorithm according to which the queues are to be
processed. This activates and deactivates QoS on the selected
interface.
Possible values:
• & D33 : QoS is activated on the interface. The
available bandwidth is distributed strictly according to the
queue priority.
• 8  @3 @: QoS is activated on the interface.
The available bandwidth is distributed according to the
weighting (weight) of the queue. Exception: High-priority pack-
14 Networking Teldat GmbH
220 bintec Rxxx2/RTxxx2
To Next Page
Loading...
Need help?
General
